New Products  Approved for BSCRA Racing




Photos by   C Frost and G Woodward

Copyright ©   2016,- 2020  British Slot Car Racing Association      All rights reserved

Cahoza UL Can, part number #232 approved for 1/24 open group 12 class only.

Eligible from 10 January 2016

JK Hawk Retro

Approved for INTRO 32 and 1/32 Production / Super Production from 1st November 2017 but areas and clubs are free to introduce it sooner if they wish.   


There are two slightly different markings

One has  “7R” marked repeatedly  and  “MADE IN CHINA” etched into the can. (Upper left photo)

One has  “R MADE IN CHINA” etched into the can. (Photos lower left an below)

Both are eligible

Please note that the similar looking Hawk 7 motor (which has  “H7 MADE IN CHINA” etched into the can) is NOT eligible for INTRO 32 or 1/32  Production/ Super Production

=========================================================================================================

===========================================================================================================


Valiko Group 12 Armature

Eigible for all BSCRA group 12 racing from 21st February 2020

NOTE - this was the armature in the production hand out motors at the 2018 and 2019 ISRA World Championships.

The photo shows the Valiko armature alongside recent examples of two other armatures which are already approved for BSCRA racing.


(Guide to motors approved for BSCRA racing)

JK Hawk 7 motor  

Eligible for INTRO 32 and 1/32 Production/ super Production classes  from
1 January 2020

Eligible for 1/32 F2 class  from 1 January 2016

The approved version has “H7 MADE IN CHINA” etched into the can (see photo  below)
Recent ones also have  a row of  “7”  s etched into the can

=====================================================================================================